Free Shipping on Orders Over $99 - Terms and Conditions Apply*

Weldclass WF-06167 - FORCE 250 Amp 255MST MIG/TIG/Arc Digital Welder

Weldclass WF-06167 - FORCE 250 Amp 255MST MIG/TIG/Arc Digital Welder

 

Freight:

This item is a heavy and large item, freight might vary from different locations, please contact us by Email or phone at (07) 3326 1555 for a more accurate shipping quote and/or any special shipping arrangements you may require.
This machine is a heavy machine more than 20 kg, please make sure you have the lifting device to load. Otherwise, please order a Hydraulic Tail Lift Service in the accessory section. Thanks.

 

The WeldForce WF-255MST 250 Amp Mig Stick & Tig Digital Synergic Welder delivers an impressive 250A @ 35% output, plus a host of impressive features to make your job easier. Work in manual mode, or synergic (select the material and thickness, and the machine takes care of the settings). PFC technology means the WF-205MST is extremely power efficient, delivering higher duty cycle and allowing use on long extension leads (up to 100m) and a great machine for use with generators where required. Stick/MMA & lift-TIG capability, job memory, 4-roll geared drive system, fan-on-demand to reduce dust intake, spool gun ready, advanced Stick and TIG functions... and a stack of other features too numerous list here! Comes with 4m MIG torch, 2-stage gas-saving regulator, full set of drive rollers for gas, gasless & aluminium wire, 4m earth and stick leads, 15A plug fitted, and cable strap system. Maximum recommended MIG welding capacity of 12mm (mild steel).

Includes:

  • Cable Retaining Strap
  • Driver Roller for 0.6/0.8mm steel/solid wire
  • Driver Roller for 0.8/0.9mm gasless wire
  • Driver Roller for 0.9/1.2mm steel/solid wire
  • Driver Roller for 1.0/1.2mm aluminium wire
  • Earth Lead H/Duty 4m
  • Gas Regulator
  • Long Power Input Lead 3m
  • MIG Torch 4m BZL 25
  • Stick Lead H/Duty 4m

Features:

  • 250A @ 35% max MIG output
  • Weld up to 12mm Mild Steel (max MIG capacity)
  • Standard: AS 60974.1
  • Fitted with 15A** 240V plug
  • Power Factor Correction (PFC) - reduced power draw, increased duty-cycle, ideal for long leads & generators
  • Manual or Synergic (enter material type & thickness and machine will set parameters automatically)
  • 20+ Pre-set Programs - for different materials
  • Job Save - store custom settings for up to 20 jobs
  • Geared 4-Roll Wire Drive System - for super reliable wirefeeding
  • Takes 5kg (D200mm) or 15kg (D300mm)spools
  • Spool Gun Ready
  • Generator Friendly - min 13kva, ideal 15+kva
  • Fan-on-Demand - reduces dust intake
  • Stressed-Tested - to 440V & over-specified componentry for reliability
  • Shipping Weight: 26kg
  • **15 Amp plug fitted for commissioning purposes only. To obtain full output, 25A or 32A plug & 4.0mm input cable should be installed by the user.

Specifications:

  • MIG*
    • Welding Current / Voltage Output    10A/16V - 250A/26.5V
    • Duty Cycle (40 C)    250A @ 35%
    • 195A @ 60%
    • 150A @ 100%
    • Wire Sizes / Capacity    0.6, 0.8, 0.9, 1.0, 1.2mm
  • Stick (MMA)*
    • Welding Current Output    10 – 250A
    • Duty Cycle    250A @ 30%
    • MMA Electrode Size / Capacity    1.6 – 4.0mm
  • TIG*
    • Welding Current Output    10 – 250A
    • Duty Cycle    250A @ 35%
    • TIG Tungsten Electrode Size / Capacity    1.6 – 2.4mm
  • *Full output of machine when upgraded plug is fitted – refer to instruction manual for full details.
  • Dimensions: L680 x W250 x H480mm
  • Weight: 26kg
  • Warranty: 7 Year Warranty (if registered within 30 days of purchase) Weldclass.com.au/WeldforceWarranty
  •  

Write a review

Please login or register to review

If you have any queries about Freight, please Call: 07 3326 1555 or Email: web@cltoolcentre.com.au 

**We are able to dispatch goods Australia wide**

** Cut Off Time For Overnight Orders is 11:30 am Subject To Stock Availability **

** International orders are accepted at our discretion, Please contact our sales team for terms conditions & charges related to overseas orders**

​Free Shipping - For Orders Over $99 (Conditions applied)

* WA Emergency Service: With key road and rail transport arrangements into and out of Western Australia significantly disrupted or unavailable, Auspost starts to charge an additional emergency measure cost of 40% (ex GST) of the freight charges. We have to temporarily exclude WA from the promotion of “Free Shipping For Orders Over $99 (Conditions applied)”.

C&L Tool Centre now offers free delivery for orders over $99 on a single transaction depending on shipping weight and Destination Zone. Please see the table below for details.

The total weight of the order must be below 20KG and the dimensions of the package have a maximum length of 1m and package volume of 0.25m³.

Items that exceed the above weights and dimensions or not meet requirements in Table1 may incur a freight charge and we will contact you prior to the dispatch to advise and confirm any freight charges.

This offer is valid for a limited time and C&L Tool Centre reserves the right to remove the offer without notice.

Table1:

Over $99 Free Shipping - Terms and Conditions

Destination Zone Cart Total Requirement For Different Shipping Weight and Zone Postcode
Zone Name

0-3KG

3.01-6KG

6.01-10KG

10.01-20KG

 
Q0 Brisbane Metro

>=$99

4000-4018, 4029-4068, 4072-4123, 4127-4129, 4131-4132, 4151-4164, 4169-4182, 4205-4206, 9000-9725
Q1 Brisbane 4019-4028, 4069-4071, 4124-4126, 4130, 4133-4150, 4165-4168, 4183-4204, 4207-4209, 4270-4299, 4500-4549
GC Gold Coast 4210-4224, 4226-4269, 9726-9919
IP Ipswich 4300-4308
SC Sunshine Coast 4550-4579
N0 Sydney Metro

>=$99

>=$199

1000-1935, 2000-2079, 2085-2107, 2109-2156, 2158, 2160-2172, 2174-2229, 2232-2249, 2557-2559, 2564-2567, 2740-2744, 2747-
2751, 2759-2764, 2766-2774, 2776-2777, 2890-2897
N1 Sydney 2080-2084, 2108, 2157, 2159, 2173, 2230-2231, 2508-2514, 2555-2556, 2560-2563, 2568-2574, 2745-2746, 2752-2758, 2765, 2775,
2778-2786
N4 Tweed Heads 2485-2486
V0 Melbourne Metro 3000-3062, 3064-3098, 3101-3138, 3140-3210, 3800-3801, 8000-8999, 9999
V1 Melbourne 3063, 3099-3100, 3139, 3335-3341, 3427-3443, 3750-3799, 3802-3811, 3910-3920, 3926-3944, 3975-3978, 3980-3983
Q5 Coolangatta 4225
Q2 QLD Country Near 4309-4453, 4580-4693
Q3 QLD Country Mid

>=$99

>=$199

>=$299

>=$399

4454-4499, 4694-4802, 4804-4805, 9920-9960
GF Gosford 2250-2263
WG Wollongong 2500-2507, 2515-2532
NC Newcastle 2282-2310
CB Canberra 200-299, 2600-2620, 2900-2920
S0 Adelaide Metro 5000-5113, 5115-5117, 5125-5130, 5158-5169, 5800-5999
S1 Adelaide 5114, 5118-5124, 5131-5157, 5170-5200
N3 Albury 1936-1999, 2640-2641, 2708-2709
N2 NSW Country 2264-2281, 2311-2484, 2487-2499, 2533-2554, 2575-2599, 2621-2639, 2642-2647, 2649-2707, 2710-2714, 2716, 2720-2730, 2787-
2879
V3 Wodonga 3689-3690
Q4 QLD Country North 4803, 4806-4999, 9961-9998
GL Geelong 3211-3220
W0 Perth Metro 6000-6030, 6036, 6050-6066, 6069, 6076, 6090-6110, 6112-6120, 6147-6160, 6162-6175, 6180, 6182-6206, 6210, 6800-6990, 6992-
6996
W1 Perth 6031-6035, 6037-6049, 6067-6068, 6070-6075, 6077-6089, 6111, 6121-6146, 6161, 6176-6179, 6181, 6207-6209, 6211-6214, 6991,
6997-6999
T0 Tasmania Select

>=$199

>=$299

>=$399

>=$699

7000-7019, 7050-7053, 7055-7108, 7172, 7248-7254, 7258-7329, 7800-7999
T1 Tasmania 7020-7049, 7054, 7109-7150, 7155-7171, 7173-7247, 7255-7257, 7330-7799
BR Ballarat 3350, 3353-3356
V2 VIC Country 2648, 2715, 2717-2719, 2731-2739, 3221-3334, 3342-3349, 3351-3352, 3357-3426, 3444-3688, 3691-3749, 3812-3909, 3921-3925,
3945-3974, 3979, 3984-3999
AAT Aust Antarctic Territory* 7151-7154
S2 SA Country 2880-2889, 5201-5749
NT1 NT Near 0800-0802, 0804-0821, 0828-0851, 0853-0853, 0860-0861, 0870-0871, 0873-0879, 0906-0999
NT2 NT Remote 0803-0803, 0822-0827, 0852-0852, 0854-0859, 0862-0869, 0872-0872, 0880-0905
NF Norfolk Is* 2898-2899
W4 Christmas  & Cocos Is* 6798-6799
W2 WA Country South 6215-6700
W3 WA Country North 6701-6797

Weldclass WF-06167 - FORCE 250 Amp 255MST MIG/TIG/Arc Digital Welder

  • $2,199.00

+ Add Optional Accessories

  • Total accessories: $0.0
  • Grand total: $2199

Oversize item Freight

Freight:
As this is a heavy and large item or oversized item, please send us an Email or call us at (07) 3326 1555 for a more accurate shipping quote and/or any special shipping requirement. Please try to offer a business address with a Forklift to get a cheaper rate. Thanks!

All Orders Over $99 Free Shipping*

Tags: Weldclass, WF-06167, FORCE, 250 Amp, 255MST, MIG, TIG, Arc, Digital Welder, Weldclass FORCE 250 Amp 255 MST MIG/TIG/Arc Digital Welder, FORCE 250 Amp 255 MST MIG/TIG/Arc Digital Welder, 255 MST MIG/TIG/Arc Digital Welder, MIG/TIG/Arc Digital Welder

ESAB 559141006 - Cutmaster 40+ Plasma Cutting Machine   ESAB Cutmaster 40+ is the perfect..
$2,699.00
ESAB 559150006 - Cutmaster 50+ Plasma Cutting Machine   Cutmaster 50+ is the perfect comb..
$3,699.00
ESAB 559170006 - Cutmaster 70+ Plasma Cutting Machine   Cutmaster 70+ is the perfect comb..
$4,240.00
Weldclass136S - 240V 130A 3.2mm Weldforce Inverter Welder Standard Package   The ULTRA 13..
$459.00
Weldclass 175MST - 240V ULTRA 175MST MIG-Stick-TIG Welder Standard Package   European qua..
$1,299.00
Weldclass WC-181S - 240V ULTRA 181S Stick Welder Standard Package   The ULTRA 181S* stick..
$749.00
Weldclass 202T - 240V ULTRA 202T AC/DC Pulse Standard Package   Everything you expect fro..
$3,999.00
Weldclass WC-250MST - 240V ULTRA 250MST MIG-Stick-TIG Welder Standard Package   Everythin..
$2,898.99
Weldclass WC-290MST - WELDFORCE 290MST MIG / Stick / TIG Welder   Freight: This item i..
$3,190.00
Weldclass WC-290MSTK4 - WELDFORCE 290MST MIG / Stick / TIG Welder with Toolbox Trolley   ..
$4,190.00
Weldclass WC-350MST - WELDFORCE 3500MST MIG / Stick / TIG Welder   Freight: This item ..
$3,799.00
Weldclass WC-350MSTK4 - FORCE 350MST MIG / Stick / TIG Welder with Toolbox Trolley   Frei..
$4,750.00
Milwaukee RD1200 – 1220m Rotary Detector   The Rotary Detector 1,220m detects the red las..
$398.50