Free Shipping on Orders Over $99 - Terms and Conditions Apply*

Weldclass WC-290MST - WELDFORCE 290MST MIG / Stick / TIG Welder

Weldclass WC-290MST - WELDFORCE 290MST MIG / Stick / TIG Welder

 

Freight:

This item is a heavy and large item, freight might vary from different locations, please contact us by Email or phone at (07) 3326 1555 for a more accurate shipping quote and/or any special shipping arrangements you may require.
This machine is a heavy machine more than 20 kg, please make sure you have the lifting device to load. Otherwise, please order a Hydraulic Tail Lift Service in the accessory section. Thanks.

 

The Force 290MST* offers unbeatable grunt from single-phase power, ideal for use where higher output is desired but 3-phase power supply is not available. With a maximum output of 290A @ 55% there's plenty of power to tackle production jobs with wires up to 1.2mm. Available as a stand-alone compact / portable machine, or can be optioned with the WF114 separate wire feeder unit either with initial purchase or as an add-on later if/when required. Features include: Easy-to-use controls (synergic or manual), 4-roll geared drive system, Job save, Spool Gun ready, and more. See below for package options.

Includes:

  •  MIG Torch 4m BZL 36
  •  Earth Lead 4m
  • Gas Regulator
  • Driver Rollers for 0.9/1.2mm steel/solid wires & 0.9/1.2mm flux-cored/gasless wires
  • Power Input Lead (4mm2) with heavy-duty 240V 15A plug fitted**
  • Separate Wire Feeder Packages include SWF114 wire feeder unit with 8m interconnecting cables

Features:

  • MIG (Gas / Gasless)
  • Stick / MMA
  • TIG (DC Lift-Arc)
  • Dual-Purpose Power Source Technology allows the 290MST to be used as a stand-alone compact / portable unit, or fitted with separate wire feeder unit
  • Max MIG output 290A @ 55% duty cycle
  • Dual Input Modes to allow use with either 240V 15A plug (fitted), or 240V 32A plug (optional) for full/maximum output**
  • Manual or Synergic MIG controls (enter material type & thickness and machine will set parameters automatically)
  • Job Save - store custom settings for up to 20 jobs
  • Geared 4-Roll Wire Drive System - for super reliable wire feeding
  • Takes 5kg (D200mm) or 15kg (D300mm)spools
  • Spool Gun Ready
  • MIG functions & adjustments include: Inductance, Soft Start, Burnback, Pre-Gas Time, Post-Gas Time, 2T/4T Trigger, Spot/Stitch Time
  • Stick/MMA functions & adjustments include: Hot-Start %, Arc-Force %
  • TIG functions & adjustments include: Trigger & Remote Amperage Control on the the torch, Post-Gas Time, Slope-Up Time
  • Generator Compatible - min 15kva, ideal 20+kva (where possible we also recommend investing in generator with 240V 32A outlet)
  • MIG welding <290A with solid mild steel (0.8-1.2mm), gasless flux-cored (0.8-1.2mm), stainless-steel (0.8-1.2mm), aluminium (0.9-1.2mm), & bronze/brazing (0.8-1.2mm) wires
  • Stick/MMA welding <270A with most types of common electrodes (2.0-4.0mm), including steel, stainless-steel, hardfacing & more
  • TIG welding <290A (DC lift-arc) of steel, stainless, copper & chrome molly up to 5-6mm max thickness (NOT suitable for TIG welding of aluminium)

Application & Capability Info:

  • MIG welding <290A with solid mild steel (0.8-1.2mm), gasless (0.8-1.2mm), flux-cored with gas (1.2mm), stainless-steel (0.8-1.2mm), aluminium (0.9-1.2mm), & bronze/brazing (0.8-1.2mm) wires
  • Stick/MMA welding <270A with most types of common electrodes (2.0-4.0mm), including steel, stainless-steel, hardfacing & more
  • TIG welding <290A (DC lift-arc) of steel, stainless, copper & chrome molly up to 5-6mm max thickness (NOT suitable for TIG welding of aluminium)

Functions:

Optional Accessories:

  • Spool Gun BZL 25 8m (part no WC-06203)
  • TIG Torch #17 4m with Remote Control (part no WC-06234)
  • Stick welding lead (# WC-06233)
  • MIG Torch Spares (BZL 36)

Downloads:

 

Write a review

Please login or register to review

If you have any queries about Freight, please Call: 07 3326 1555 or Email: web@cltoolcentre.com.au 

**We are able to dispatch goods Australia wide**

** Cut Off Time For Overnight Orders is 11:30 am Subject To Stock Availability **

** International orders are accepted at our discretion, Please contact our sales team for terms conditions & charges related to overseas orders**

​Free Shipping - For Orders Over $99 (Conditions applied)

* WA Emergency Service: With key road and rail transport arrangements into and out of Western Australia significantly disrupted or unavailable, Auspost starts to charge an additional emergency measure cost of 40% (ex GST) of the freight charges. We have to temporarily exclude WA from the promotion of “Free Shipping For Orders Over $99 (Conditions applied)”.

C&L Tool Centre now offers free delivery for orders over $99 on a single transaction depending on shipping weight and Destination Zone. Please see the table below for details.

The total weight of the order must be below 20KG and the dimensions of the package have a maximum length of 1m and package volume of 0.25m³.

Items that exceed the above weights and dimensions or not meet requirements in Table1 may incur a freight charge and we will contact you prior to the dispatch to advise and confirm any freight charges.

This offer is valid for a limited time and C&L Tool Centre reserves the right to remove the offer without notice.

Table1:

Over $99 Free Shipping - Terms and Conditions

Destination Zone Cart Total Requirement For Different Shipping Weight and Zone Postcode
Zone Name

0-3KG

3.01-6KG

6.01-10KG

10.01-20KG

 
Q0 Brisbane Metro

>=$99

4000-4018, 4029-4068, 4072-4123, 4127-4129, 4131-4132, 4151-4164, 4169-4182, 4205-4206, 9000-9725
Q1 Brisbane 4019-4028, 4069-4071, 4124-4126, 4130, 4133-4150, 4165-4168, 4183-4204, 4207-4209, 4270-4299, 4500-4549
GC Gold Coast 4210-4224, 4226-4269, 9726-9919
IP Ipswich 4300-4308
SC Sunshine Coast 4550-4579
N0 Sydney Metro

>=$99

>=$199

1000-1935, 2000-2079, 2085-2107, 2109-2156, 2158, 2160-2172, 2174-2229, 2232-2249, 2557-2559, 2564-2567, 2740-2744, 2747-
2751, 2759-2764, 2766-2774, 2776-2777, 2890-2897
N1 Sydney 2080-2084, 2108, 2157, 2159, 2173, 2230-2231, 2508-2514, 2555-2556, 2560-2563, 2568-2574, 2745-2746, 2752-2758, 2765, 2775,
2778-2786
N4 Tweed Heads 2485-2486
V0 Melbourne Metro 3000-3062, 3064-3098, 3101-3138, 3140-3210, 3800-3801, 8000-8999, 9999
V1 Melbourne 3063, 3099-3100, 3139, 3335-3341, 3427-3443, 3750-3799, 3802-3811, 3910-3920, 3926-3944, 3975-3978, 3980-3983
Q5 Coolangatta 4225
Q2 QLD Country Near 4309-4453, 4580-4693
Q3 QLD Country Mid

>=$99

>=$199

>=$299

>=$399

4454-4499, 4694-4802, 4804-4805, 9920-9960
GF Gosford 2250-2263
WG Wollongong 2500-2507, 2515-2532
NC Newcastle 2282-2310
CB Canberra 200-299, 2600-2620, 2900-2920
S0 Adelaide Metro 5000-5113, 5115-5117, 5125-5130, 5158-5169, 5800-5999
S1 Adelaide 5114, 5118-5124, 5131-5157, 5170-5200
N3 Albury 1936-1999, 2640-2641, 2708-2709
N2 NSW Country 2264-2281, 2311-2484, 2487-2499, 2533-2554, 2575-2599, 2621-2639, 2642-2647, 2649-2707, 2710-2714, 2716, 2720-2730, 2787-
2879
V3 Wodonga 3689-3690
Q4 QLD Country North 4803, 4806-4999, 9961-9998
GL Geelong 3211-3220
W0 Perth Metro 6000-6030, 6036, 6050-6066, 6069, 6076, 6090-6110, 6112-6120, 6147-6160, 6162-6175, 6180, 6182-6206, 6210, 6800-6990, 6992-
6996
W1 Perth 6031-6035, 6037-6049, 6067-6068, 6070-6075, 6077-6089, 6111, 6121-6146, 6161, 6176-6179, 6181, 6207-6209, 6211-6214, 6991,
6997-6999
T0 Tasmania Select

>=$199

>=$299

>=$399

>=$699

7000-7019, 7050-7053, 7055-7108, 7172, 7248-7254, 7258-7329, 7800-7999
T1 Tasmania 7020-7049, 7054, 7109-7150, 7155-7171, 7173-7247, 7255-7257, 7330-7799
BR Ballarat 3350, 3353-3356
V2 VIC Country 2648, 2715, 2717-2719, 2731-2739, 3221-3334, 3342-3349, 3351-3352, 3357-3426, 3444-3688, 3691-3749, 3812-3909, 3921-3925,
3945-3974, 3979, 3984-3999
AAT Aust Antarctic Territory* 7151-7154
S2 SA Country 2880-2889, 5201-5749
NT1 NT Near 0800-0802, 0804-0821, 0828-0851, 0853-0853, 0860-0861, 0870-0871, 0873-0879, 0906-0999
NT2 NT Remote 0803-0803, 0822-0827, 0852-0852, 0854-0859, 0862-0869, 0872-0872, 0880-0905
NF Norfolk Is* 2898-2899
W4 Christmas  & Cocos Is* 6798-6799
W2 WA Country South 6215-6700
W3 WA Country North 6701-6797

Weldclass WC-290MST - WELDFORCE 290MST MIG / Stick / TIG Welder

  • $3,190.00

+ Add Optional Accessories

  • Total accessories: $0.0
  • Grand total: $3190

Oversize item Freight

Freight:
As this is a heavy and large item or oversized item, please send us an Email or call us at (07) 3326 1555 for a more accurate shipping quote and/or any special shipping requirement. Please try to offer a business address with a Forklift to get a cheaper rate. Thanks!

All Orders Over $99 Free Shipping*

Tags: Weldclass, WC-290MST, WELDFORCE, 290MST, MIG, Stick, TIG, Welder, WELDFORCE 290MST MIG / Stick / TIG Welder, 290MST MIG / Stick / TIG Welder

ESAB 559141006 - Cutmaster 40+ Plasma Cutting Machine   ESAB Cutmaster 40+ is the perfect..
$2,699.00
ESAB 559150006 - Cutmaster 50+ Plasma Cutting Machine   Cutmaster 50+ is the perfect comb..
$3,699.00
ESAB 559170006 - Cutmaster 70+ Plasma Cutting Machine   Cutmaster 70+ is the perfect comb..
$4,240.00
Weldclass136S - 240V 130A 3.2mm Weldforce Inverter Welder Standard Package   The ULTRA 13..
$459.00
Weldclass 175MST - 240V ULTRA 175MST MIG-Stick-TIG Welder Standard Package   European qua..
$1,299.00
Weldclass WC-181S - 240V ULTRA 181S Stick Welder Standard Package   The ULTRA 181S* stick..
$749.00
Weldclass 202T - 240V ULTRA 202T AC/DC Pulse Standard Package   Everything you expect fro..
$3,999.00
Weldclass WC-250MST - 240V ULTRA 250MST MIG-Stick-TIG Welder Standard Package   Everythin..
$2,898.99
Weldclass WC-290MSTK4 - WELDFORCE 290MST MIG / Stick / TIG Welder with Toolbox Trolley   ..
$4,190.00
Weldclass WC-350MST - WELDFORCE 3500MST MIG / Stick / TIG Welder   Freight: This item ..
$3,799.00
Weldclass WC-350MSTK4 - FORCE 350MST MIG / Stick / TIG Welder with Toolbox Trolley   Frei..
$4,750.00
Weldclass WC-395MSTK2 - MIG / Stick / TIG Welder FORCE 395MST Pulse With Trolley   Freigh..
$4,999.00
Milwaukee RD1200 – 1220m Rotary Detector   The Rotary Detector 1,220m detects the red las..
$398.50