Free Shipping on Orders Over $99 - Terms and Conditions Apply*

Makita DLX1502PT - 18V 5.0Ah Cordless Brushless 15 Piece Combo Kit

Makita DLX1502PT - 18V 5.0Ah Cordless Brushless 15 Piece Combo Kit

Freight:

  • This item is a heavy and large item, freight might vary from different locations, please contact us at Email or phone us on (07) 3326 1555 for a more accurate shipping quote and/or any special shipping arrangements you may require.

Delivery:

  • This is a heavy item more than 52 kg (in two cartons), please make sure you have the lifting device to load. Otherwise, please order a Hydraulic Tail Lift Service in the accessory section. Thanks.

Includes:

  • Makita DHP481Z - 18v Li-ion Cordless Brushless Hammer Driver Drill Skin
  • Makita DTD154Z - 18V 4-Mode Cordless Brushless Impact Driver Skin
  • Makita DGA504Z - 18V 125mm Brushless Angle Grinder Skin
  • Makita DHS680Z - 18V 165mm Brushless Circular Saw Skin
  • Makita DHR242Z - 18V 24mm Cordless Brushless Rotary Hammer Drill Skin
  • Makita DJR187Z - 18V 2-Speed Cordless Brushless Recipro Saw Skin
  • Makita DTW300Z - 18V 1/2" Cordless Brushless Impact Wrench Skin
  • Makita DTW1001Z - 18V Mobile Brushless 3/4' Impact Wrench
  • Makita DJV182Z - 18v Cordless Brushless Jigsaw Skin
  • Makita DKP180Z - 18V 82mm Cordless Planer Skin
  • Makita DTM51ZX5 18V Lever Style Lock Multi Tool Skin
  • Makita DUB185Z - 18V LXT Cordless Blower Skin
  • Makita DCL180Z - 18V LXT Cordless Vacuum Cleaner Skin
  • Makita DML805 - 240V and 18V Mobile LED Worklight
  • Makita DMR108 - 18V Bluetooth Job Site Radio Skin
  • 4 x Makita BL1850B-L - 18V 5.0Ah Lithium Battery with Charge Indicator
  • Makita DC18RD - 18V Dual Port Battery Charger 196936-0
  • 2 x Carry Bag

Makita DHP481Z - 18v Li-ion Cordless Brushless Hammer Driver Drill Skin

Features:

  • Single sleeve keyless chuck.
  • Mode ring selection.
  • Mechanical 2 speed gearing.
  • Twin LED job light with after-glow function.
  • Battery fuel gauge shows power remaining in battery.
  • Long rigid side grip helps to stabilize the bit for steady drilling/screwdriving.
  • All metal gear construction.
  • Wider torque range of 1 - 10Nm in clutch mode allows for versatile applications.
  • Single sleeve keyless chuck allows for easy bit installation.removal by one hand.
  • High performance Brushless DC motor. Produces more work amount on a single battery charge while also being durable against long continuous operation.
  • Extreme Protection Technology with enhanced dust and drip resistant performance.

Specifications:

  • Voltage: 18V
  • Impacts Per Minute
    • Hi: 0 - 31,000ipm
    • Lo: 0 - 8,250ipm
  • Max Fastening Torque:
    • Hard: 115Nm
    • Soft: 60Nm
  • No Load Speed:
    • Hi: 0 - 2,100rpm
    • Lo: 0 - 550rpm
  • Capacity:
    • Masonry: 16mm
    • Steel: 13mm
    • Wood: 76mm
  • Dimensions (L x W x H): 205mm x 79mm x 249mm
  • Weight: 2kg

Makita DTD154Z - 18V 4-Mode Cordless Brushless Impact Driver Skin

Features:

  • Brushless motor for more power and longer runtimes.
  • Aluminium hammer case.
  • One touch bit installation.
  • Electronic 3 stage impact selection.
  • T:mode for self drilling screws.
  • Variable speed control by trigger.
  • Ergonomically designed handle. 

Specifications:

  • Voltage: 18V
  • Impacts per minute:
    • Speed 1: 0 - 3800ipm
    • Speed 2: 0 - 2600ipm
    • Speed 3: 0 - 1100ipm
  • Vibration level: 12.5m/s²
  • Sound pressure level: 96dB(A)
  • Sound power level: 107dB(A)
  • No load speed:
    • Speed 1: 0 - 3600rpm
    • Speed 2: 0 - 2100rpm
    • Speed 3: 0 - 1100rpm
  • Capacity:
    • Machine screw: M4 - M8
    • Standard bolt: M5 - M16
    • High strength bolt: M5 - M14
    • Coarse thread (length): 22mm - 125mm
  • Max fastening torque: 175Nm
  • Dimensions (L x W x H): 117mm x 79mm x 236mm
  • Weight: 1.2kg

Warranty:

  • 3 Years Warranty Covered By Makita Australia

Makita DGA504Z - 18V 125mm Brushless Angle Grinder Skin

Features:

  •  Powerful Brushless DC motor (BLDC)
  •  Slide switch
  •  Automatic Torque Drive - changes the cutting speed to load condition for an optimum operation
  •  Battery fuel gauge
  •  Gear housing can be rotated to suit most cutting and grinding applications
  •  Anti-restart function prevents accidental start-up
  •  Concrete cutting depth of 20mm
  •  Extreme Protection Technology with enhanced dust and drip resistant performance
  •  Compatible with 1.5, 3.0, 4.0 and 5.0Ah Lithium-Ion batteries

Specifications:

  • Net Weight: 2.5kg
  • No Load Speed : 8,500rpm
  • Overall Length : 362mm
  • Wheel Size : 125 x 22mm

Includes:

  • 125mm Grinding Disc
  • Side Grip (153489-2)
  • Tool-less Guard (125267-0)
  • Lock Nut Wrench (782407-9)

Makita DHS680Z - 18V 165mm Brushless Circular Saw Skin

Features:

  •  Powerful Brushless DC motor (BLDC)
  •  Automatic Torque Drive; automatically increases motor torque according to load conditions
  •  Magnesium base with 45 and 50 degrees bevel cutting capacity
  •  Compact and lightweight design
  •  Rear dust exhaust port
  •  Twin LED job light with pre-glow
  •  LED indicator panel with 3 indicators for: Battery Fuel Gauge, Automatic Torque Drive and Overload Protection
  •  Tool hanger for hanging on a ladder or rafter
  •  Large lock off lever easily operated even with a gloved hand
  •  Compatible with 1.5, 3.0, 4.0 and 5.0Ah Lithium-Ion batteries

Specifications:

  • Bevel Capacity: 50 degrees
  • Blade Diameter: 165mm
  • Max Cutting Capacities - at 0 degrees: 57mm
  • Max Cutting Capacities - at 45 degrees: 41mm
  • Max Cutting Capacities - at 50 degrees : 37mm
  • Net Weight : 3.3kg
  • No Load Speed :  5,000rpm
  • Overall Length : 350mm
  • Voltage : 18V

Includes:

  • Blu Mak 165mm Saw Blade (B-15073).
  • Guide Rule (164095-8).
  • Hex Wrench (783217-7).

Makita DHR242Z - 18V 24mm Cordless Brushless Rotary Hammer Drill Skin

Festures:

 

  • Brushless DC motor helps to reduce energy loss by 30%
  • One touch sliding SDS Plus type chuck
  • Variable speed control by trigger
  • Torque limiter
  • Easy to grip handle ergonomically designed to provide a sure and comfortable grip in any application
  • Natural position on mode selector provides 40 different bit angle settings
  • 3 mode operation: Rotation+Hammering, Hammering only, Rotation only
  • Unique rubber joint construction suppresses the transmission of vibration to battery terminals, minimising battery failures
  • The tool body is separated into the upper and lower housings with vibration absorbing cushion rubbers
  • Compatible with 1.5, 3.0, 4.0 and 5.0Ah Lithium-Ion batteries

Specifications:

 

  • Drive Shank - SDS Plus Type
  • Impact Rate - 0-4,700ipm
  • Joules - 2.0J
  • Net Weight - 3.3kg
  • No Load Speed - 0-950rpm
  • Overall Length - 328mm
  • Capacity
  • Concrete - 24mm
  • Steel - 13mm
  • Wood - 27mm
  • Vibration m/s2 - 13.5
  • Voltage - 18V

Includes:

  • Grip Assembly
  • Depth Gauge

Makita DJR187Z - 18V 2-Speed Cordless Brushless Recipro Saw Skin

Features:

  • BL Brushless Motor design
  • Newly designed vertical crank mechanism
  • large 32mm stroke length
  • Retractable sky hook
  • Electronic 2 speed 
  • Tool-less shoe adjustment
  • Tool-less blade change
  • LED joblight

Specifications:

  • Length of Stroke: 32mm
  • Max Cutting Capacities - In Pipe: 130mm
  • Max Cutting Capacities - In Wood: 255mm
  • Net Weight: 3.7kg with BL1850
  • Overall Length: 439mm
  • Strokes Per Minute: Hi: 0-3,000 / Lo: 0-2,300spm

Makita DTW300Z - 18V 1/2" Cordless Brushless Impact Wrench Skin

Features:

  • Variable speed trigger & Quick Trigger mode which engages immediate full speed
  • Forward & Reverse Automatic Stop, with 6 modes for customised applications
  • High power in a compact design with 330Nm maximum fastening torque
  • 4 stages of impact force enables the user to set the appropriate torque for each application
  • eXtreme Protection Technology (XPT) provides enhanced protection against dust and moisture

Specifications:

  • Drive Shank: 12.7mm (1/2”) Square
  • Impact Rate: Max: 0 - 4,000ipm, High: 0 - 3,400ipm, Med: 0 - 2,600ipm, Soft: 1,800ipm
  • Max. capacities high tensile bolt: M10 - M16
  • Max. capacities standard bolt: M10 - M20
  • Max Fastening Torque: Max: 330Nm, Hard: 210Nm, Medium: 160Nm, Soft: 100Nm
  • No Load Speed: Max: 0 - 3,200rpm, High: 0 - 2,600rpm, Medium: 0 - 1,800rpm, Soft: 0 - 1,000rpm
  • Nut busting torque: Medium 580Nm
  • Overall Length: 144mm
  • Skin weight: 1.2kg
  • Voltage: 18V

Makita DTW1001Z - 18V Mobile Brushless 3/4' Impact Wrench

Features:

  • BL Brushless Motor, providing more power and longer run times.
  •  3 stage impact selection, reduces both rpm and fastening torque.
  •  Twin LED joblight, with pre glow and after glow functions.
  •  Rubber joint construction, suppresses the transmission of vibration to battery terminals.

Specifications:

  • Part Number: DTW1001Z
  • Impact Rate - 1st: 2,200 ipm
  • Impact Rate - 2nd: 2,000 ipm
  • Impact Rate - 3rd: 1,800 ipm
  • Max Fastening Torque - 1st: 1,050 N.m.
  • Max Fastening Torque - 2nd: 600 N.m.
  • Max Fastening Torque - 3rd: 400 N.m.
  • Max. nut busting torque: 1,700 N.m
  • Net Weight: 3.1 kg
  • No Load Speed - 1st: 1,800
  • No Load Speed - 2nd: 1,000
  • No Load Speed - 3rd: 900

Makita DJV182Z - 18v Cordless Brushless Jigsaw Skin

Features:

  • The DJV182Z jigsaw has a brushless motor which allows the user to achieve an upto 50% increase in runtime per battery charge, meaning that you'll have plenty more time to get that precise finish that you're after;
  • This DJV182 is a makita D handle jigsaw, which has a different design to its brother the DJV181 that is designed with a barrel handle. This model features a trigger switch to operate and an electrical lock off button atop the handle allowing you to lock on a function;
  • At just 266mm in length the DJV182 is incredible compact and it weighs in at just 2.6Kgs when a battery is attached;
  • The DJV182 jigsaw has 3 orbital settings allowing for customised cuts, as well as a straight cut mode. The Aluminium base has a bevel range of 0 to 45 degrees.;
  • You can easily attach a dust extractor to this brushless makita jigsaw by attaching the included nozzle to the sawdust exhaust port situated at the rear of the tool;

Specifications:

  • Speed: Variable
  • 3 Position Orbital Action
  • Tool Free Blade Change
  • Stroke Length: 26mm
  • Max Cutting Capacity:
    • Wood: 135mm
    • Metal: 10mm
    • Aluminium: 20mm
  • No Load Speed: 0-3500rpm
  • Dimensions (LxWxH): 266x77x208mm
  • Weight : 2.6kg

Includes:

  • 6 Piece Jigsaw Blade Set
  • Anti Splintering Device (192557-6)
  • Cover Plate (417852-6)
  • Hex Wrench (783202-0)

Makita DKP180Z - 18V 82mm Cordless Planer Skin

Features:

  • Foot on base protects work piece and blades from scratches and damages
  • V-groove on base for easy chamfer cutting
  • Enhanced chip ejection thanks to improved fan design that produces larger exhaust volume
  • Connectable to Makita dust extraction systems and dust bag assembly
  • Ergonomic angle and shape for easy gripping and handling
  • Planing depth adjustment knob for precise depth setting
  • Click stops and easy-to-read scale with 0.1mm divisions
  • Covered with non-slip elastomer for secure and comfortable grip
  • Electric brake for fast stopping of blades
  • Compatible with 15, 3.0, 4.0 and 5.0Ah Lithium-Ion batteries

Specifications:

  • Net Weight - 3.4kg
  • No Load Speed - 14,000rpm
  • Overall Length - 333mm
  • Planing
  • Depth - 2mm
  • Width - 82mm
  • Shiplapping - 9mm
  • Voltage - 18V

Includes:

  • 2 x Mini TCT  Planer Blades
  • Blade Gauge Assembly
  • Guide Rule Assembly
  • Socket Wrench

Makita DTM51ZX5 18V Lever Style Lock Multi Tool Skin

Features:

  • Tool-less accessory clamp: Lever style lock system allows for quick installation and replacement of the accessories
  • Variable speed control by dial
  • Anti-restart function
  • Soft start allows accurate landing of the blade on the surface of the work piece
  • 12 angle settings at every 30° from 0° to 360°
  • Battery capacity warning lamp:
    • Blinking red: battery power is nearly used up
    • Solid Red: Battery power is uesd up;battery protection circuit will shut off the power

Specifications:

  • Net Weight 2.2kg
  • Oscillation Angle, Left/Right 1.6 (3.2 total)
  • Oscillations Per Minute 6,000 - 20,000
  • Overall Length 340mm
  • Vibration m/s2 7.0
  • Voltage 18V

Includes:

  • 1 x Hook & Loop Abrasive Pad
  • 9x Sanding Papers
  • 1 x 28mm Plunge Cutting Saw Blade
  • 1 x 85mm Segment Saw Blade
  • 1 x Blade Adaptor
  • Tool Box (for stroing oscillating multi tool accessories)
  • Hex Wrench

Makita DUB185Z - 18V Cordless Blower Skin

Features:

  • Increased air volume with 3.2m³/min
  • 3 stage air volume settings & variable speed trigger for maximum control
  • Wind speeds of up to 352km/h for higher blowing efficiency
  • Ultra-lightweight at just 2.1kg

Specifications:

  • Max air volume: 3.2m³/min
  • Max. Air Velocity: 352km/h
  • No Load Speed: 0 - 18,000rpm
  • Overall Length: 517mm
  • Skin weight: 1.5kg
  • Voltage: 18V
  • Weight (with battery): 2.1kg

Includes:

  • Nozzle assembly (123245-4)

Makita DCL180Z - 18V LXT Cordless Vacuum Cleaner Skin

Features:

  • On/Off trigger switch
  • 650mL dust container with fleece filter
  • 4.2kpa* of sealed suction performance
  • Lightweight at just 1.7kg
  • Compatible with 1.5, 3.0, 4.0 and 5.0Ah Lithium-Ion batteries

*Average over 2 min with full charge 18V battery and standard filter

Specifications:

  • Air Volume:  1.4m2/sec
  • Dust Collecting Capacity:  650mL
  • Max. Air Suction:  4.2kPa
  • Net Weight:  1.7kg
  • Overall Length:  476mm
  • Suction Efficiency:  30W
  • Voltage:  18V

Includes:

  • Nozzle Assembly (T-nozzle)
  • Sash Nozzle
  • Pipe
  • Sash Nozzle Holder
  • Filter
  • Pre-Filter

Makita DML805 - 240V and 18V Mobile LED Worklight

Features:

  • Powered by both 18V Lithium ion batteries and 240V AC power
  • Light source is able to rotate 360 degrees to point in desired direction.
  • High light output 20 bright white LEDs producing 1,150lx.
  • Battery capacity warning function, alerts user to low battery power by reducing the brightness of LEDs leaving only one LED on.
  • Can be mounted to tripod or vise avaliable as optional accessories.

Specifications:

  • Continuous Use - Hi: 5.0Ah 8.5 hours
  • Continuous Use - Lo: 5.0Ah 17 hours
  • Net Weight: 2.0kg
  • 2-mode operation: delivers 750 lumens on High mode or 440 lumens on Low mode

Makita DMR108 - 18V Bluetooth Job Site Radio Skin

Features:

  • Bluetooth connectivity - connect wirelessly to a mobile deice with a range of up to 10m
  • USB port - charges smart phones and selected tablet devices when plugged into AC power
  • AUX-in for playing audio from an external source
  • 2x large 89mm diameter speakers provide high quiality sound
  • Water and shock resistant IP64 rated
  • Dual power sources - AC or Makita Li-ion
  • Compatible with Makita li-ion batteries (7.2V, 10.8V, 12VMAX, 14.4V and 18V)

Specifications:

  • Dimensions (LxWxH): 257x163x431mm
  • Net Weight: 4.3kg

Makita BL1850B-L - 18V 5.0Ah Lithium Battery with Charge Indicator

 

Features:

  • Fuel gauge indicator, displays charge remaining on battery in four stages
  • Built in memory chip communicates the usage history with the charger
  • Built in shock absorbers protect the cells from jobsite conditions
  • High energy cells pack more power per cell to reduce number of cells and overall weight
  • Large release button for easy removal from the tool
  • Built in air vents and wall cools the battery cells evenly whilst blocking damaging debris
  • 16 contact terminals provide consistent power and firm hold in any environment

Specifications:

  • Cell Capacity: 5.0Ah
  • Charge Time: 45mins w/DC18RC
  • Net Weight: 630g
  • Voltage: 18V

Makita DC18RD - 18V Dual Port Battery Charger 196936-0

Features:

  • Simultaneous Charging – with dual ports for charging two batteries at the same time
  • Rapid Charge Technology – selects the optimum voltage, current and temperature for improved charge time
  • Forced Air System – circulates air through the battery to reduce temperature and charge time
  • USB port – for charging 1.5A devices
  • Full charge sound alert
  • LED charging display

Specifications:

  • Net Weight 1.9kg
  • Overall Length: 200mm
  • Voltage: 18V

Charging Times:

  • Two - BL1815 18V Makita 1.5Ah Batteries 15 minutes + Universal USB port for charging mobile Devices
  • Two - BL1830 18V Makita 3.0Ah Batteries 22 minutes + Universal USB port for charging mobile Devices
  • Two - BL1840 18V Makita 4.0Ah Batteries 36 minutes + Universal USB port for charging mobile Devices
  • Two - BL1850 18V Makita 5.0Ah Batteries 45 minutes + Universal USB port for charging mobile Devices

Write a review

Please login or register to review

If you have any queries about Freight, please Call: 07 3326 1555 or Email: web@cltoolcentre.com.au 

**We are able to dispatch goods Australia wide**

** Cut Off Time For Overnight Orders is 11:30 am Subject To Stock Availability **

** International orders are accepted at our discretion, Please contact our sales team for terms conditions & charges related to overseas orders**

​Free Shipping - For Orders Over $99 (Conditions applied)

* WA Emergency Service: With key road and rail transport arrangements into and out of Western Australia significantly disrupted or unavailable, Auspost starts to charge an additional emergency measure cost of 40% (ex GST) of the freight charges. We have to temporarily exclude WA from the promotion of “Free Shipping For Orders Over $99 (Conditions applied)”.

C&L Tool Centre now offers free delivery for orders over $99 on a single transaction depending on shipping weight and Destination Zone. Please see the table below for details.

The total weight of the order must be below 20KG and the dimensions of the package have a maximum length of 1m and package volume of 0.25m³.

Items that exceed the above weights and dimensions or not meet requirements in Table1 may incur a freight charge and we will contact you prior to the dispatch to advise and confirm any freight charges.

This offer is valid for a limited time and C&L Tool Centre reserves the right to remove the offer without notice.

Table1:

Over $99 Free Shipping - Terms and Conditions

Destination Zone Cart Total Requirement For Different Shipping Weight and Zone Postcode
Zone Name

0-3KG

3.01-6KG

6.01-10KG

10.01-20KG

 
Q0 Brisbane Metro

>=$99

4000-4018, 4029-4068, 4072-4123, 4127-4129, 4131-4132, 4151-4164, 4169-4182, 4205-4206, 9000-9725
Q1 Brisbane 4019-4028, 4069-4071, 4124-4126, 4130, 4133-4150, 4165-4168, 4183-4204, 4207-4209, 4270-4299, 4500-4549
GC Gold Coast 4210-4224, 4226-4269, 9726-9919
IP Ipswich 4300-4308
SC Sunshine Coast 4550-4579
N0 Sydney Metro

>=$99

>=$199

1000-1935, 2000-2079, 2085-2107, 2109-2156, 2158, 2160-2172, 2174-2229, 2232-2249, 2557-2559, 2564-2567, 2740-2744, 2747-
2751, 2759-2764, 2766-2774, 2776-2777, 2890-2897
N1 Sydney 2080-2084, 2108, 2157, 2159, 2173, 2230-2231, 2508-2514, 2555-2556, 2560-2563, 2568-2574, 2745-2746, 2752-2758, 2765, 2775,
2778-2786
N4 Tweed Heads 2485-2486
V0 Melbourne Metro 3000-3062, 3064-3098, 3101-3138, 3140-3210, 3800-3801, 8000-8999, 9999
V1 Melbourne 3063, 3099-3100, 3139, 3335-3341, 3427-3443, 3750-3799, 3802-3811, 3910-3920, 3926-3944, 3975-3978, 3980-3983
Q5 Coolangatta 4225
Q2 QLD Country Near 4309-4453, 4580-4693
Q3 QLD Country Mid

>=$99

>=$199

>=$299

>=$399

4454-4499, 4694-4802, 4804-4805, 9920-9960
GF Gosford 2250-2263
WG Wollongong 2500-2507, 2515-2532
NC Newcastle 2282-2310
CB Canberra 200-299, 2600-2620, 2900-2920
S0 Adelaide Metro 5000-5113, 5115-5117, 5125-5130, 5158-5169, 5800-5999
S1 Adelaide 5114, 5118-5124, 5131-5157, 5170-5200
N3 Albury 1936-1999, 2640-2641, 2708-2709
N2 NSW Country 2264-2281, 2311-2484, 2487-2499, 2533-2554, 2575-2599, 2621-2639, 2642-2647, 2649-2707, 2710-2714, 2716, 2720-2730, 2787-
2879
V3 Wodonga 3689-3690
Q4 QLD Country North 4803, 4806-4999, 9961-9998
GL Geelong 3211-3220
W0 Perth Metro 6000-6030, 6036, 6050-6066, 6069, 6076, 6090-6110, 6112-6120, 6147-6160, 6162-6175, 6180, 6182-6206, 6210, 6800-6990, 6992-
6996
W1 Perth 6031-6035, 6037-6049, 6067-6068, 6070-6075, 6077-6089, 6111, 6121-6146, 6161, 6176-6179, 6181, 6207-6209, 6211-6214, 6991,
6997-6999
T0 Tasmania Select

>=$199

>=$299

>=$399

>=$699

7000-7019, 7050-7053, 7055-7108, 7172, 7248-7254, 7258-7329, 7800-7999
T1 Tasmania 7020-7049, 7054, 7109-7150, 7155-7171, 7173-7247, 7255-7257, 7330-7799
BR Ballarat 3350, 3353-3356
V2 VIC Country 2648, 2715, 2717-2719, 2731-2739, 3221-3334, 3342-3349, 3351-3352, 3357-3426, 3444-3688, 3691-3749, 3812-3909, 3921-3925,
3945-3974, 3979, 3984-3999
AAT Aust Antarctic Territory* 7151-7154
S2 SA Country 2880-2889, 5201-5749
NT1 NT Near 0800-0802, 0804-0821, 0828-0851, 0853-0853, 0860-0861, 0870-0871, 0873-0879, 0906-0999
NT2 NT Remote 0803-0803, 0822-0827, 0852-0852, 0854-0859, 0862-0869, 0872-0872, 0880-0905
NF Norfolk Is* 2898-2899
W4 Christmas  & Cocos Is* 6798-6799
W2 WA Country South 6215-6700
W3 WA Country North 6701-6797

Makita Limited Warranty

MAKITA POWER TOOLS & ACCESSORIES

Makita Power Tools & Accessories are manufactured to the highest quality standards and are thoroughly inspected and tested before leaving the factory. In addition to any statutory rights and remedies you may have, Makita warrants its products sold new in Australia via an Authorised Makita Australia Dealer against defective workmanship and faulty materials from the date of purchase by the end customer for the corresponding period set out in the Classifications below (calculated in each case from the date of purchase):

*Limited to purchases that are registered online at Makita.com.au/MyMakita within 30 days of invoice. This offer is extended to purchases made between 1st January 2020 and 30th June 2020, which must be registered by 31st July 2020 to qualify.

**Purchases registered post 30 days of invoice or non-registered purchases, including those prior to 1st January 2020.

***The spare parts must also have been fitted by an Authorised Service Agent.

Makita will undertake, as its option, to repair or replace, free of charge, each product or part thereof which qualifies under this Limited Warranty on the condition that:

• The complete product is returned to Makita or one of its Authorised Service Agents, in person or freight pre-paid by you, and found, on examination, to be suffering from a manufacturing defect;

• The product or relevant part has not been subjected to misuse, neglect, or been involved in an accident; and

• The repairs are not required as a result of normal wear and tear.

Makita cannot be held responsible for any repair other than those carried out by it or one of its Authorised Service Agents. In Australia “Makita” means MAKITA (AUSTRALIA) PTY LIMITED, 2 Litton Close, Pemulwuy NSW 2145, Telephone: 1300 361 690.

IMPORTANT NOTE FOR AUSTRALIAN CONSUMERS:

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Makita (Australia) Pty Ltd ACN 001 117 335.

PLEASE RETAIN A COPY OF THE TAX INVOICE FOR YOUR WARRANTY.

Makita DLX1502PT - 18V 5.0Ah Cordless Brushless 15 Piece Combo Kit

Makita March Madness Sale 2024

Promotion Period: 

Start Date: 1st March 2024
End Date: 31st March 2024
 

Unlock your next adventure and WIN a $4,000 Travel Voucher!*

Buy any Makita product for the chance to go in the draw to win.

1 ENTRY POINT FOR EVERY DOLLAR SPENT!

Register your entry: https://campaign.ubpages.com/makita-march-madness/

*Terms and conditions apply. See the full list here.

  • Views: 4496
  • Product Code: DLX1502PT
  • Warranty:
  • RFQ

All Orders Over $99 Free Shipping*

Tags: Makita, DLX1502PT, 18V Combo Kit, 15 Piece Combo Kit, Cordless Combo Kit, Combo Kits, Makita Combo Kit

Makita DLX8006PG - 18V Cordless Brushless 8 Piece Combo Kit Kit Includes:  1x DHP481Z ..
RFQ
Makita DLX8011PG - 18V 6.0Ah Cordless Brushless 8 Piece Combo Kit This item is no longer availabl..
RFQ
Makita DLX1509TX1 - 18V 4x5.0Ah LXT Cordless Brushless 15 Piece Combo Kit Includes: 1 x&nbs..
$4,369.00
Makita DLX8016PT - 18V 5.0Ah Cordless Brushless 8 Piece Combo Kit Limited stock while stock lasts..
RFQ
Makita DLX8016PG - 18V 6.0Ah Cordless Brushless 8 Piece Combo Kit   Freight: A..
RFQ
The Makita MLT100 - 240V 255mm Table Saw has been replaced by the new model: Makita MLT100N - 240..
RFQ
Hydraulic Tail Lift Service Fee Please Note:  If one of your item's weight is 25kgs or ab..
$75.00
Scheppach TIGER 2000S - (240V) 200 x 40mm K 250 Grinder Stone Wetstone Grinder W859 IDEAL FO..
$220.00