WIA CP140-1 - Weldmatic 500I Multi-Process Welder Package

Freight:

This item is a heavy and large item, freight might vary from different location, please contact us at Email or phone us on (07) 3326 1555 for a more accurate shipping quote and/or any special shipping arrangements you may require.

Delivery:

This is a heavy item more than 100kg, please make sure you have the lifting device to load. Otherwise, please order a Hydraulic Tail Lift Service in the accessory section. Thanks.

Features:

• INDUSTRIAL MULTI-PROCESS WELDING SOLUTION
  • This 500 Amp three phase multi-process inverter suits MIG, Stick, Arc Air Gouging and Lift-Arc TIG welding and is ideal for medium to heavy fabrication, and all general industrial fabrication applications.
• VARIABLE ARC CONTROL
  • The package features allow full control of the arc. Infinite voltage control and arc control to adjust arc harshness and arc start to control the wire starting speed.
• VRD
  • Built-in VRD delivers added safety when operating in Stick or Lift-TIG mode and meets the requirements of site work. Fully compliant to Australian Standards AS 60974.1 & AS1674.2 CAT C.
• FLEXIBILITY & POWER
  • Optimal weld characteristics provide high-quality results on steel, stainless steel and aluminium, plus the power to comfortably run all popular sizes of solid and flux cored wires. With the capacity to run 1.6mm flux cored wire, the 500i can handle a wide range of applications.
• BUILT-IN OPERATOR SAFETY
  • The power source features a built-in thermal protection device that will cut in if the machine is operated beyond its safe thermal operating zone.
• DIGITAL METERS
  • Digital Volt and Amp meters retain last weld information and allow precise set-up.
• GAS OR GASLESS
  • Suits gas shielded and flux cored wires.
• COMES WITH A 32 AMP SUPPLY PLUG
• SPOOL CAPACITY
  • 5kg & 15kg
• 3 YEAR GOLD SHIELD WARRANTY
  • Every Weldmatic machine is backed by WIA’s industry-leading ‘Gold Shield 3 Year Warranty’, covering parts and labour, and supported by an Australia wide service network. You can be guaranteed you’re buying reliability and performance. For details, refer to the Weldmatic warranty statement.
• GENERATORS*
  • Generators used to power this equipment must have a minimum capacity of 25kW continuous.

Specifications:

• Primary Voltage: 380/415 Vac - 50/60 Hz 3 Phase
• Rated Primary Current: 28.7 Amps
• Max. Primary Current: 37 Amps
• Recommended Generator kVa: 25 kVA    
• Rated Output @ 40C (10min)    
  • Stick MMA
    • 490 Amps @ 39.6 Volts 60% Duty Cycle
    • 387 Amps @ 33.4 Volts 100% Duty Cycle
  • TIG
    • 500 Amps @ 60 Volts, 60% Duty Cycle
    • 387 Amps @ 25.5 Volts, 100% Duty Cycle
  • MIG
    • 500 Amps @ 39 Volts, 60% Duty Cycle
    • 387 Amps @ 33.4 Volts, 100% Duty Cycle
• Welding Current Range: 37 - 500 Amps
• Wire Size Range (mm):
  • Carbon Arc Air Max. 8mm
  • 0.9-1.6 solid
  • 0.9-1.6 cored
• Shipping Weight: 138kg

Includes:

• Interconnecting Lead (10m)
• W65 4 Roll Drive Heavy Duty Wire feeder
• Euro Gun Cable (3.6m) with Bernard Centerfire 0.9mm Tip
• Work Lead (10m) with Heavy Duty G Clamp
• Industrial Twist Lock Electrode Holder (3m)
• Gas Regulator
• Drive Rollers 
  • 0.9/1.2 & 1.2/1.6mm V Groove 
  • 0.9/1.2 & 1.2/1.6mm Knurled