Festool CTM 26 EI AU - 240V 1200W 26L M Class EI Dust Extractor 577921

The all-rounder for workshops and construction sites.
The CLEANTEC CTM 26 EI offers a large 26 l container volume combined with compact dimensions. It comes with touch operation for intuitively controlling your extractor. It has a permanently installed Bluetooth® interface for starting the extractor using a Festool cordless tool or automatically starting it with optional remote control. Or you can connect it to the Festool app. The smooth, anti-static suction hose can be handily stowed away in the integrated hose holder. T-LOC enables you to quickly connect Systainers, pre-separators or Workcenters. This means that your extractor becomes the central point of the system.

Includes:

• 1 x CTM 26l M Class EI Dust Extractor
• 1 x Main Filter M Class
• 1 x Replacement Selfclean Filter Bag
• 1 x Anti Static Smooth Suction Hose D32/27mm x 3.5m
• 1 x Floor Nozzle
• 1 x Plastic Curved Hand Tube 36 mm
• 1 x Plastic Tube Set 36 mm
• 1 x Cable Wrap
• 1 x Tool Manual

Features:

• Intuitive: Touch operation for simple control of the extractor.
• Automatic electrical outlet module: For corded power tools. Starts up the power tool and automatically starts up your extractor too.
• Suction power: Depending on the application, this can be set to five levels.
• Smart: The integrated Bluetooth® technology starts the dust extractor automatically via Bluetooth® battery packs or optional remote control.
• Convenient: T-LOC function makes it easy to install Systainers on the mobile dust extractor.
• Powerful: Constantly high suction because of the compact high performance turbine.
• Antistatic function: Prevents static developing during work.
• Neat and tidy: Hose holder and cable winder for greater tidiness and safety
• Smooth suction hose: with conical geometry for high suction power and seamless processes without catching.
• Transportation: Large pivoting rollers and an integrated brake ensure optimal mobility and stability.
• Cost-efficient: Optimal volume usage of the container.
• Can be retrofitted: With compressed-air module or electrical outlet module
• Approval: Dust class M

Main Applications:

• For hazardous wood dust and mineral dust from dust class M with limit values > 0.1 mg/m³
• Flexible and clean in the workshop and at the construction site thanks to a compact design and a container volume of 26 litres
• Integral automatic electronic switch-on/shut-off for extraction from electric power tools
• Suitable for both wet and dry extraction

Specifications:

• Power Consumption: 350 W - 1,200 W
• Maximum Airflow: 3,900 l/min
• Maximum Vacuum: 24,000 Pa
• Filter Surface Area: 6,318 cm2
• Container/Filter Bag Capacity: 26 L / 24 L
• Dust Approval Rating: Dust Class M - medium risk dust such as mineral and wood dust
• Mains Cable Length: 7.5 m
• Maximum Wattage of Connected Tool: 2,400 W
• Dimensions - L x W x H: 630 mm x 365 mm x 540 mm
• Product weight without accessories: 13.90 kg
• Transport weight incl. accessories: 17.22 kg
• Drive type: Mains
• Technology: Bluetooth®
• Dust extraction: A-weighted sound pressure level, LpA – 71.00 dB(A)
• Dust extraction: Standards series EN 60745 – 60335-2-69
• Dust extraction: Uncertainty (noise) K – 3.00 dB

Working With Hazardous Dust 

• Test report: EVA Respirable Crystalline Silica and Total Respirable Dust Exposures Report
• Test report: ESP Airborne Occupational Exposure Report

*Festool dust extractors are fitted with a circuit breaker for safety when a connected load of 1200 watts is exceeded.
Some tools that draw higher wattage can trigger the circuit breaker and if initiated requires the reset button above the socket to be pushed in and reset.
When requiring to use larger wattage tools with dust extraction it is recommended the tool is operated off a separate outlet and a Bluetooth system can then be used to switch the dust extractor on and off as required.
When using tools it is recommended you always use the correct consumable for best results as even lower wattage tools can trip the circuit breaker if the system isn’t matched to the application. (e.g.: saw blade not matched to material)