Cigweld W1008193 - WeldSkill 185LCD Complete Multi Process Welding Inverter

The WeldSkill 185LCD is a complete 3in1 offer that includes all the accessories required to get you MIG, STICK and TIG welding immediately (3m MIG Torch, 4m TIG Torch & 3m Electrode Holder included).

Features:

• Plug and play, suitable for use with any standard 10Amp power point.
• 2.8" Full colour LCD display screen with easy navigation of all functions.
• Adjustable backburn control: Adjust the amount of MIG wire that protrudes from the MIG torch after the completion of MIG welding.
• Arc Control (Inductance): The arc control operates in MIG (GMAW/FCAW) mode only and is used to adjust the intensity of the welding arc
• Spot Weld (MIG Mode): Spot Welding allows the user to pre-set the duration time of their welds up to 10 seconds (MIG mode only)
• Downslope (TIG Mode): Down Slope allows the user to pre-set the time for the weld current to ramp down (TIG mode only)
• Hot start: Improves the arc start characteristics of stick electrodes
• Anti stick: Helps to prevent the stick electrode for sticking to the work surface
• Voltage Reduction Device: Standards Compliant Voltage Reduction Device (Stick Mode Only)
• Euro Torch Connection
• SGT250 Spool Gun Compatible: Ideal for Aluminium Fabrication, Repairs and Auto/Marine work. Compatible with Tweco SGT250 Spool Gun
• Over Temperature Protection: Cut out protection has been fitted to the power source
• Recommended Generator: 10kVA (at 0.8 Power Factor)* *Refer to operating manual for further information
• Compliance: Fully compliant to AS 60974.1-2020 Enclosure rated to IP21S
• Warranty: 2 Year Warranty* on Power Source *Refer to Operation Manual for full details
• Wire Type: Suitable for Gas and Gasless Wires

Specifications:

• Welder Type: MIG, Stick, Lift TIG (Inverter Power Source)
• Number Of Phases: Single Phase
• Nominal Supply Voltage: 240V +/-15%
• Nominal Supply Frequency: 50/60Hz
• Nominal DC Open Circuit Voltage (MIG Weld Mode): 69V (trigger switch depressed when not welding)
• Factory Fitted Supply Plug Rating: 10Amps
• Open Circuit Voltage (VRD On) Stick Weld Mode: <35V
• Effective Input Current (l1eff): 10Amps
• Maximum Input Current (l1max): 33Amps
• Minimum Single Phase Generator: 10kVA At 0.8PF
• Protection Class: IP21S
• MIG (GMAW) Welding Output (40ºC, 10min): 185A at 10%, 23.3V  
• STICK (MMAW) Welding Output (40ºC, 10min): 160A at 10%, 26.4V  
• TIG (GTAW) Welding Output (40ºC, 10min): 160A at 20%, 16.4V  
• Standards:
  • AS 60974.1-2020
  • IEC 60974-1
• Dimensions (L x W x H): 371mm x 205mm x 478mm
• Weight: 13.9kg

Includes:

• WeldSkill 185LCD Inverter Plant W1008193
• WeldSkill 185LCD Power Source
• MIG Torch with Euro Connection, 3m
• CIGWELD TIG Torch 17V with Gas Valve and On/Off Switch
• Twistlock Electrode Holder with 3m Lead
• CutSkill Argon Regulator/Flowmeter
• Work Clamp with 3m Lead
• Shielding Gas Hose Assembly, 3m
• Feed Rolls: 0.8/0.9mm Flux Cored (Fitted), 0.8/0.9mm V Groove
• Contact Tip: 0.8mm (Fitted)
• Operating Manual (can be downloaded at cigweld.com.au/manuals)

Optional Accessories:

• E-180 MIG Torch (included with package) W4018800
• TIG Torch 17V with 4m lead, gas valve & remote control W4013800
• TIG Torch 17V, 4m lead and Gas valve W4013801
• TIG Torch Accessory Kit for 17, 18 & 26 TIG Torches BGSAK2
• Tweco SGT250 Spool Gun W4011250
• WeldSkill Argon Regulator / Flowmeter, 55LPM, 2 Gauge 210254
• MIG Pliers WSPLIER
• WeldSkill Welding Equipment Trolley W4011501