Thermal Dynamics 1-1930-4 Manual Cutmaster 40mm Plasma Cutting Inverters
This Product has been discontinued, please check the similar product Plasma Cutting
The Cutmaster 40mm plasma is the largest air-cooled manual system in the range. The heavy-duty inverter system with a duty cycle of 80% in a 40’C ambient, is specifically designed for high-level applications requiring superior endurance and cutting performance.
Cutting Capacity:
- True Cut: 40mm.
- Max. Cut: 50mm.
- Severance Cut: 55mm.
- Pierce Rating: 25mm.
Features:
- 415 Volt, 3 phase, 50/60 Hz
- Auto pilot restart
- True Guard roll bar
- SL100 6.1m hand cutting torch
- 120 amp output
- 3 year limited warranty
Specifications:
- Processes: Plasma Cutting
- Supply Voltage: 415 volt (+/- 15%), 3 phase, 50/60Hz
- Minimum Recommended Generator: 16.5kVA
- Max. Output Current: 120 amps
- Output Power: 15.4KW
- Duty Cycle (@ 40 Degrees Celcius): 120 amps @ 80%
- Power Source Weight: 28.1kg
- Dimensions (Power Source): 385h x 315w x 775l mm
| Typical Use | |
| Heavy | <a href="#"><img src="image/data/site_graphics/03-usage.jpg" title="GREEN = Light | YELLOW = Medium | ORANGE = Heavy | RED = Industrial" /></a> |
If you have any queries about Freight, please Call: 07 3363 0555 or Email: web@cltoolcentre.com.au
**We are able to dispatch goods Australia wide**
** Cut Off Time For Overnight Orders is 11:30 am Subject To Stock Availability **
** International orders are accepted at our discretion, Please contact our sales team for terms conditions & charges related to overseas orders**
Discounted Flat $9.50 Shipping For Orders Over $99 (Conditions applied)
C&L Tool Centre now offers a discounted flat shipping fee of $9.50 for all orders over $99 on a single transaction depending on shipping weight and Destination Zone. Please see the table below for details. Orders under $99 on a single transaction will have delivery fees calculated based on your delivery postcode, as well as the weight and size of the items in your cart.
The total shipping weight* of the order must be below 20KG and the dimensions of the package have a maximum length of 1m and package volume of 0.25m³. (*Shipping weight is the higher of the actual weight or the cubic weight.)
Items that exceed the above weights and dimensions or not meet requirements in Table 1 may incur an additional freight charge and we will contact you prior to the dispatch to advise and confirm any freight charges.
C&L Tool Centre reserves the right to remove this offer without notice.
Table1:
Orders Over $99: Discounted Flat Shipping Fee - Terms and Conditions |
||||||
| Destination Zone | Cart Total Requirement For Different Shipping Weight and Zone | Postcode | ||||
| Zone | Name |
0-3KG |
3.01-6KG |
6.01-10KG |
10.01-20KG |
|
| Q0 | Brisbane Metro |
>=$99 |
4000-4018, 4029-4068, 4072-4123, 4127-4129, 4131-4132, 4151-4164, 4169-4182, 4205-4206, 9000-9725 | |||
| Q1 | Brisbane | 4019-4028, 4069-4071, 4124-4126, 4130, 4133-4150, 4165-4168, 4183-4204, 4207-4209, 4270-4299, 4500-4549 | ||||
| GC | Gold Coast | 4210-4224, 4226-4269, 9726-9919 | ||||
| IP | Ipswich | 4300-4308 | ||||
| SC | Sunshine Coast | 4550-4579 | ||||
| N0 | Sydney Metro |
>=$99 |
>=$199 |
1000-1935, 2000-2079, 2085-2107, 2109-2156, 2158, 2160-2172, 2174-2229, 2232-2249, 2557-2559, 2564-2567, 2740-2744, 2747- 2751, 2759-2764, 2766-2774, 2776-2777, 2890-2897 |
||
| N1 | Sydney | 2080-2084, 2108, 2157, 2159, 2173, 2230-2231, 2508-2514, 2555-2556, 2560-2563, 2568-2574, 2745-2746, 2752-2758, 2765, 2775, 2778-2786 |
||||
| N4 | Tweed Heads | 2485-2486 | ||||
| V0 | Melbourne Metro | 3000-3062, 3064-3098, 3101-3138, 3140-3210, 3800-3801, 8000-8999, 9999 | ||||
| V1 | Melbourne | 3063, 3099-3100, 3139, 3335-3341, 3427-3443, 3750-3799, 3802-3811, 3910-3920, 3926-3944, 3975-3978, 3980-3983 | ||||
| Q5 | Coolangatta | 4225 | ||||
| Q2 | QLD Country Near | 4309-4453, 4580-4693 | ||||
| Q3 | QLD Country Mid |
>=$99 |
>=$199 |
>=$299 |
>=$399 |
4454-4499, 4694-4802, 4804-4805, 9920-9960 |
| GF | Gosford | 2250-2263 | ||||
| WG | Wollongong | 2500-2507, 2515-2532 | ||||
| NC | Newcastle | 2282-2310 | ||||
| CB | Canberra | 200-299, 2600-2620, 2900-2920 | ||||
| S0 | Adelaide Metro | 5000-5113, 5115-5117, 5125-5130, 5158-5169, 5800-5999 | ||||
| S1 | Adelaide | 5114, 5118-5124, 5131-5157, 5170-5200 | ||||
| N3 | Albury | 1936-1999, 2640-2641, 2708-2709 | ||||
| N2 | NSW Country | 2264-2281, 2311-2484, 2487-2499, 2533-2554, 2575-2599, 2621-2639, 2642-2647, 2649-2707, 2710-2714, 2716, 2720-2730, 2787-2879 | ||||
| V3 | Wodonga | 3689-3690 | ||||
| Q4 | QLD Country North | 4803, 4806-4999, 9961-9998 | ||||
| GL | Geelong | 3211-3220 | ||||
| W0 | Perth Metro | 6000-6030, 6036, 6050-6066, 6069, 6076, 6090-6110, 6112-6120, 6147-6160, 6162-6175, 6180, 6182-6206, 6210, 6800-6990, 6992-6996 (UP TO 3KG) | ||||
| W1 | Perth | 6031-6035, 6037-6049, 6067-6068, 6070-6075, 6077-6089, 6111, 6121-6146, 6161, 6176-6179, 6181, 6207-6209, 6211-6214, 6991, 6997-6999 (UP TO 3KG) | ||||
| T0 | Tasmania Select |
>=$199 |
>=$299 |
>=$399 |
>=$699 |
7000-7019, 7050-7053, 7055-7108, 7172, 7248-7254, 7258-7329, 7800-7999 (UP TO 3KG) |
| T1 | Tasmania | 7020-7049, 7054, 7109-7150, 7155-7171, 7173-7247, 7255-7257, 7330-7799 (UP TO 3KG) | ||||
| BR | Ballarat | 3350, 3353-3356 | ||||
| V2 | VIC Country | 2648, 2715, 2717-2719, 2731-2739, 3221-3334, 3342-3349, 3351-3352, 3357-3426, 3444-3688, 3691-3749, 3812-3909, 3921-3925, 3945-3974, 3979, 3984-3999 |
||||
| AAT | Aust Antarctic Territory* | 7151-7154 (UP TO 3KG) | ||||
| S2 | SA Country | 2880-2889, 5201-5749 | ||||
| NT1 | NT Near | 0800-0802, 0804-0821, 0828-0851, 0853-0853, 0860-0861, 0870-0871, 0873-0879, 0906-0999 (UP TO 3KG) | ||||
| NT2 | NT Remote | 0803-0803, 0822-0827, 0852-0852, 0854-0859, 0862-0869, 0872-0872, 0880-0905 ((UP TO 3KG)) | ||||
| NF | Norfolk Is* | 2898-2899 (UP TO 3KG) | ||||
| W4 | Christmas & Cocos Is* | 6798-6799 (UP TO 3KG) | ||||
| W2 | WA Country South | 6215-6700 (UP TO 3KG) | ||||
| W3 |
WA Country North |
6701-6797 (UP TO 3KG) | ||||
Thermal Dynamics 1-1930-4 Manual Cutmaster 40mm Plasma Cutting Inverters
-
Cigweld
- Product Code: 1-1930-4
- Warranty: Manufacturer Warranty*
- RFQ
- $8,972.55
