Wacker Neuson MCT36-5 - 915mm (36") M Series Petrol Walk Behind Trowel Concreteing

Wacker Neuson MCT36-5 - 915mm (36") M Series Petrol Walk Behind Trowel

Freight:

This item is a heavy and large item, freight might vary from different location, please contact us at Email or phone us on (07) 3326 1555 for a more accurate shipping quote and/or any special shipping arrangements you may require.

Delivery:

This is a heavy item more than 80 kg, please make sure you have the lifting device to load. Otherwise, please order a Hydraulic Tail Lift Service in the accessory section. Thanks.

The M-series MCT36 Walk-behind Trowel is ideal for areas less than 500 square meters reducing the time required to finish the job. This trowel is optimally balanced and can be effortlessly controlled in a wide range of speeds. The MCT36 Walk-behind Trowel will make your process more efficient and improve the concrete surface finish.

Features:

  • Equipped with height adjustable "whale tail" trowel handle for ergonomic operation.
  • Powered with reliable and powerful four-stroke Petrol engine.
  • Variable speeds: lower speeds for floating, higher speeds for finishing.
  • Throttle control located on the handle for adjusting blade speed.
  • Integrated lift point for job site maneuvering.

Specifications:

  • Troweling diameter: 915mm
  • Pitch range: 0-15 °
  • Rotor Speed  (min/max.): 70/137rpm
  • Quantity of blades: 4
  • Engine / Motor: Air-cooled, single-cylinder four-cycle Petrol engine
  • Engine / Motor manufacturer:  Loncin
  • Engine / Motor type:  G200F
  • Displacement:  196 cm³
  • Engine performance @ 3,600 rpm: 4.1 (5.5) kW (hp)
  • RPM: 3,600 rpm
  • Fuel consumption:  1.2 l/h
  • Fuel tank capacity:  3.6 l
  • Tank capacity (engine oil): 0.6 l
  • Length: 1820 mm
  • Width: 945 mm
  • Height: 980 mm
  • Weight: 83 kg

Write a review

Please login or register to review

If you have any queries about Freight, please Call: 07 3326 1555 or Email: web@cltoolcentre.com.au 

**We are able to dispatch goods Australia wide**

** Cut Off Time For Overnight Orders is 11:30 am Subject To Stock Availability **

** International orders are accepted at our discretion, Please contact our sales team for terms conditions & charges related to overseas orders**

​Free Shipping - For Orders Over $99 (Conditions applied)

C&L Tool Centre now offers free delivery for orders over $99 on a single transaction depending on shipping weight and Destination Zone. Please see table below for details.

The Total weight of the order must be below 20KG and the dimensions of the package have a maximum length of 1m and package volume of 0.25m³.

Items that exceed the above weights and dimensions or not meet requirements in Table1 may incur a freight charge and we will contact you prior to the dispatch to advise and confirm any freight charges.

This offer is valid for a limited time and C&L Tool Centre reserves the right to remove the offer without notice.

Table1:

Over $99 Free Shipping - Terms and Conditions

Destination Zone Cart Total Requirement For Different Shipping Weight and Zone Postcode
Zone Name

0-3KG

3.01-6KG

6.01-10KG

10.01-20KG

 
Q0 Brisbane Metro

>=$99

4000-4018, 4029-4068, 4072-4123, 4127-4129, 4131-4132, 4151-4164, 4169-4182, 4205-4206, 9000-9725
Q1 Brisbane 4019-4028, 4069-4071, 4124-4126, 4130, 4133-4150, 4165-4168, 4183-4204, 4207-4209, 4270-4299, 4500-4549
GC Gold Coast 4210-4224, 4226-4269, 9726-9919
IP Ipswich 4300-4308
SC Sunshine Coast 4550-4579
N0 Sydney Metro

>=$99

>=$149

1000-1935, 2000-2079, 2085-2107, 2109-2156, 2158, 2160-2172, 2174-2229, 2232-2249, 2557-2559, 2564-2567, 2740-2744, 2747-
2751, 2759-2764, 2766-2774, 2776-2777, 2890-2897
N1 Sydney 2080-2084, 2108, 2157, 2159, 2173, 2230-2231, 2508-2514, 2555-2556, 2560-2563, 2568-2574, 2745-2746, 2752-2758, 2765, 2775,
2778-2786
N4 Tweed Heads 2485-2486
V0 Melbourne Metro 3000-3062, 3064-3098, 3101-3138, 3140-3210, 3800-3801, 8000-8999, 9999
V1 Melbourne 3063, 3099-3100, 3139, 3335-3341, 3427-3443, 3750-3799, 3802-3811, 3910-3920, 3926-3944, 3975-3978, 3980-3983
Q5 Coolangatta 4225
Q2 QLD Country Near 4309-4453, 4580-4693
Q3 QLD Country Mid

>=$99

>=$149

>=$199

>=$399

4454-4499, 4694-4802, 4804-4805, 9920-9960
GF Gosford 2250-2263
WG Wollongong 2500-2507, 2515-2532
NC Newcastle 2282-2310
CB Canberra 200-299, 2600-2620, 2900-2920
S0 Adelaide Metro 5000-5113, 5115-5117, 5125-5130, 5158-5169, 5800-5999
S1 Adelaide 5114, 5118-5124, 5131-5157, 5170-5200
N3 Albury 1936-1999, 2640-2641, 2708-2709
N2 NSW Country 2264-2281, 2311-2484, 2487-2499, 2533-2554, 2575-2599, 2621-2639, 2642-2647, 2649-2707, 2710-2714, 2716, 2720-2730, 2787-
2879
V3 Wodonga 3689-3690
Q4 QLD Country North 4803, 4806-4999, 9961-9998
GL Geelong 3211-3220
W0 Perth Metro 6000-6030, 6036, 6050-6066, 6069, 6076, 6090-6110, 6112-6120, 6147-6160, 6162-6175, 6180, 6182-6206, 6210, 6800-6990, 6992-

Wacker Neuson MCT36-5 - 915mm (36") M Series Petrol Walk Behind Trowel

  • Views: 351
  • Product Code: MCT36-5
  • Availability: In Stock
  • Warranty: Manufacturer Warranty*
  • $1,350.00

+ Add Optional Accessories

  • Total accessories: $0.0
  • Grand total: $1350

All Orders Over $99 Free Shipping*

Tags: Wacker Neuson, MCT36-5, 915MM Trowel, 36" Trowel, M Series, Gasoline Trowel, Walk Behind, Trowel, Concreting Tools, Petrol Trowel, MCT365

Fuller 489-2111R - Powder Coated Red 11 Drawer Tool Cabinet The Fuller 489-2111R - Powder Coate..
$1,360.00
INTEX TIX900 - Automatic Taper Description: The Intex Automatic Taper simultaneously applies t..
$3,025.00
Easymix EM35 - 240V 3.5 Cft Electric Cement Mixer Trade Freight Note* For freight costings on ..
$1,299.00
Kreg KMS7704 - 48" Heavy Duty Trak The Heavy-Duty Trak is an 'L' shaped, anodized aluminum extrus..
$109.00
Stabila 80A/100 - 1000mm Box Frame 2 Vial Trade Ribbed Level  Aluminium rectangular profi..
$53.00